10 Best Steckregal of 2019

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

  • Neutral colors with chic style
  • Fast and simple assembly
  • Dimensions: 30x43x105cm
  • Starch cupboards
  • Exclusive Offering
  • Dimensions (L x W x H): 13.5 "x 18.1" x 6.25 "
  • Starch cupboards
  • Exclusive Offering
  • Dimensions (L x W x H): 13.5 x 20.7 x 6.25 "
  • Starch cupboards
  • Exclusive Offering
  • Dimensions (L x W x H): 13.5 x 20.7 x 6.25 "
  • Neutral colors with chic style
  • Fast and simple assembly
  • Dimensions: 30x43x105cm

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

No products found.

Steckregal Ratgeber

Steck shelves are used in the private sector for the storage of supplies, tools or garden boxes. These are located in the garden shed, cellar or in the garage. In commercial areas these are used especially in the craft or warehouse sectors. The plug-in shelves are available in different sizes and different materials. Available is one Steckregal in the hardware store or on various trading platforms on the Internet.

Plug shelf made of plastic

On Steckregal from the lower price segment is usually made of plastic, because the production costs are lower. The system is very simple. There are at least two plates each with a hole on the four sides. There are at least four rods that are inserted into the holes. Then there are four feet that are put into the bottom plate. Only one person is necessary for the assembly and the assembly system makes the installation not complicated and time-saving.

Another advantage of the material is its easy handling. The shelfCan be wiped with a damp cloth or rinsed under running water. The plastic shelf is suitable for outdoor use as moisture and snow do not harm the shelf. However, this should not be exposed to direct sunlight, because the material deforms at high outside temperatures. The load depends on the stability of the plastic. At a high load, the rods can bend outward and that Steckregal becomes unstable, which is why such a shelf is not suitable for the storage of tools or machines.

Plug-in rack made of metal

Robust and significantly heavier are metal racks. The system deviates slightly from the plastic racks. In total, there are four perforated struts, at the bottom and top of plastic caps are placed so that the metal is not the bottom or the blanketscratched. At any height intermediate shelves can be embedded, which are connected by the holes by means of screws. The shelves are made of metal or a metal frame, in which a wooden plate is embedded.

The material is resistant and can carry high loads. These include garden Tools, Machines for craft activities or heavy boxes. To better stabilize the rule these are to be mounted on the masonry. For this, dowels and screws are necessary. Even outdoors, they can withstand all kinds of weather due to the alloy, provided the shelves are not made of wood. By screwing with the masonry they can not fall over even in a storm.

What to look for when purchasing?

At a Steckregal It is very important that the load is determined in advance. Otherwise this can not be charged enough. The load should be stated in the product description, otherwise buyers must contact the dealer. In the production should be dispensed with plasticizer, otherwise the shelf will not last long. Plasticizers are often found among Asian manufacturers to achieve higher profits because the raw material is expensive for certain manufacturers.

The struts should be no sharp edges, this processing error occurs, the buyer can Steckregal exchange or repair in places. If wood floors are embedded in the metal frames as floors, the quality of the wood panels is simply important. MDF panels are the only panels that guarantee stability. Instead, low-price manufacturers like to use a wood-chip mixture, which is pressed together with an adhesive. The user will hardly enjoy it, because even a liquid is enough, so that the plate bulges and becomes unstable. It may break while the plate is being loaded. The manufacturer does not pay for any resulting damage.

Plug-in shelves can DIY but also build yourself. This is useful if one or more plug-in racks are required in a special size that is not available in stores. To do this, tradespeople of length must buy at least four pipe poles at the hardware store. These can also be angular. Alternatively, there are already prefabricated metal strips. Furthermore, metal shelves are required and MDF panels. The pipe bars must be halved lengthwise and cut to size. Then small holes are drilled in the tube halves. The MDF panels are cut to any size and to these the strips are screwed. Insert shelf supports into the holes, attach plastic attachments to the lower and upper ends, then place the shelves on the brackets and screw the shelf to the masonry.

[relatedYouTubeVideos relation=”keywords” terms=”Steckregal” max=”1″]

*Last update on 2019-09-18 / Affiliate links(we get a commission when you buy on amazon) / Images from Amazon Product Advertising API