10 Best drain cock of 2019

  • 1
  • Features
    • 1/4" DRAIN FOR AIR TANK TO RELEASE EXCESS FLUID MOISTURE
    • TURN THE THUMBSCREW TO RELEASE MOISTURE FROM AIR TANK
    • 250 PSI MAX PRESSURE
    • Free Shipping
  • 2
  • Features
    • Each time your compressor runs, the moisture in the air condenses in the tank. This moisture must be drained daily from the tank to prevent water buildup. Hromee Extended Tank Drain Valve Assembly is perfect for the compressor tank.
    • The valve kit comes with a 10" flexible braided steel drain hose which prevents breaking and kinks. 1/4in. NPT threads at both ends matches 1/4in. NPT male brass fittings. Max working pressure: 175 PSI. Blasting Pressure: 475 PSI. Max Temperature: 200 degrees F.
    • This 1/4 in. ball valve is made of chrome-plated brass for higher corrosion resistance than regular brass or steel, and has a lever handle for on/off to control the flow between pipes, tubes, or hoses. The rubber-wrapped handle is designed for easy-use and labor-saving. This ball valve is pressure rated to 300 PSI at a maximum operating temperature of 212 degrees F.
    • The extended tank drain kit offers a 1/4 in. elbow with pre-applied thread sealant, allowing for attaching the additional drain hose or elbow. A thread seal tape is equipped with this drain kit for multiple use to prevent leaks.
    • There is a Hex bushing brass adapter which is 3/8" Male x 1/4" Female for connecting two pipes or with different diameters. Has a 3/8" male NPT threaded on one end and a 1/4" female NPT threaded on the other for connecting a female and a male pipe or fitting with different diameters Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • 3
  • Features
    • Ideal for replacing air compressor drain cocks
    • High quality, O-ring free construction
    • Pre-applied thread sealant for airtight connections
  • 4
  • Features
    • Replacement part for damaged drain cocks on compressor tanks
    • Turn handle to drain water, close drain cock when water is drained
    • 1/8" male national pipe thread
    • Made in USA
    • Milton is your number 1 source for Quality Air Accessories
  • 5
  • Features
    • Manufactured to the highest quality standards to ensure superior long-term performance
    • Solid brass construction with steel handle
    • Working temperature range: -65 F to +250 F; 150 PSI maximum operating pressure
    • 1/4 inch male NPT
    • For use with air, water, gas, and other fluids (not intended for natural gas, LPG, or lubricants)
  • 6
  • Features
    • NPT: 3/8" national pipe thread.
    • USE: To replace old or damaged drain cocks on compressor tanks.
    • DURABLE: Brass body and steel handle.
    • RELEASE: Air from tanks before replacing drain cock. Turn handle to drain water. Close when water is drained.
    • OTHER SIZES OFFERED: Milton also offers drain cocks in 1/2", 1/4", and 1/8" NPT sizes.
  • 7
  • Features
    • Economical
    • Metal-to-metal seal
    • External and internal seats
  • 8
  • Features
    • WING STYLE DRAIN COCK - This 1/4 in. Brass Winged Tank Drain Cock is the perfect replacement for damaged or leaking drain cocks for pressure vessels on air compressors or air tanks. Winged style for easy moisture drainage from tanks. The handle is made of steel plated zinc and the most twist force is 12 LBS.
    • TWIST STYLE PETCOCK - This 1/4" NPT Drain Cock is designed from air compressor tanks to add to compressor longevity. Also known as a petcock. This is o-ring sealed for easy use, features a knurled twist grip. It is crafted with brass to help ensure strength.
    • SAFETY VALVE - Safety valves are ideal for protecting pneumatic systems and equipment from over-pressurization. This essential safety device activates when pressure in an air compressor tank exceeds a pre-set level, releasing the excessive pressure and keeping the tank from rupturing. The body is made of brass while the spring and pull ring are made of stainless steel. The max pressure is 140 PSI and the air flow is 55 SCFM.
    • HEX- HEAD PLUGS - This hex-head plug is a brass fitting with 1/4" male NPT threads. The hex-head plug fitting inserts into a pipe or fitting to close and terminate its end. This fitting is made of brass for corrosion resistance and ductility at high temperatures.
    • MATERIAL - High quality fittings manufactured to the highest standards made of premium brass construction for maximum strength and durability. Thread sealant is recommended for use with all brass fittings.
  • 9
  • Features
    • Ideal for replacing air compressor drain cocks
    • High quality, O-ring free construction for long, trouble-free life
    • Pre-applied thread sealant for air tight connections
  • 10
  • Features
    • 1/4-Inch NPT
    • Wing style
    • Powermate tank drain valve creates a snug fit to prevent unwanted air or water seepage
    • Drain compressor regularly for optimal performance
  • Each time your compressor runs, the moisture in the air...
  • The valve kit comes with a 10" flexible braided steel drain...
  • This 1/4 in. ball valve is made of chrome-plated brass for...
  • Each time your compressor runs, the moisture in the air...
  • The valve kit comes with a 10" flexible braided steel drain...
  • This 1/4 in. ball valve is made of chrome-plated brass for...
  • 1/4" DRAIN FOR AIR TANK TO RELEASE EXCESS FLUID MOISTURE
  • TURN THE THUMBSCREW TO RELEASE MOISTURE FROM AIR TANK
  • 250 PSI MAX PRESSURE
  • Replacement part for damaged drain cocks on compressor tanks
  • Turn handle to drain water, close drain cock when water is...
  • 1/8" male national pipe thread
  • Manufactured to the highest quality standards to ensure...
  • Solid brass construction with steel handle
  • Working temperature range: -65 F to +250 F; 150 PSI maximum...
  • NPT: 3/8" national pipe thread.
  • USE: To replace old or damaged drain cocks on compressor...
  • DURABLE: Brass body and steel handle.
  • Economical
  • Metal-to-metal seal
  • External and internal seats
  • WING STYLE DRAIN COCK - This 1/4 in. Brass Winged Tank Drain...
  • TWIST STYLE PETCOCK - This 1/4" NPT Drain Cock is designed...
  • SAFETY VALVE - Safety valves are ideal for protecting...
  • Ideal for replacing air compressor drain cocks
  • High quality, O-ring free construction for long,...
  • Pre-applied thread sealant for air tight connections
  • 1/4-Inch NPT
  • Wing style
  • Powermate tank drain valve creates a snug fit to prevent...

Drain tap counselor

a drain cock Most consumers have long seen, but many often forget the exact name. What is certain is that the drain cock has long been part of our everyday life for many years and this is one more reason why the purchase can be worthwhile to dismantle old outlet taps and to install a new one. After all, quality is simply part of one drain cock sometimes it can be better to scrap the old-fashioned models and replace them with new ones. In any case, most consumers should do this and we will show why and how best to proceed before you buy.

The cost of drain taps in the check

The cost of a casserole varies greatly. There can be various reasons for this and, above all, the place of purchase and the manufacturer are ultimately responsible for how different the costs can fluctuate. But not only the place of purchase or manufacturer makes the prices, but also the material and the dimensions of the outlet tap, so there are also versatile price ranges, which must be considered. Thus, price segments from 10 euros to 100 euros may well be the rule. It should not be more expensive or it is whole sets. Because in this price range, there is a great variety of quality outlet taps that you can order and that should be enough.

Place of purchase for outlet taps

The place of purchase must be decided by consumers themselves, but there will not be too much choice on the spot. The Internet is there in terms of drain cock full of surprises and shows that there is a lot of choice online. In most cases, the assortments online are better, so even with the outlet taps the great selection is given and that suggests that you as a consumer looking for a drain cock should rather look online. Nevertheless, there is certainly the possibility in cities to look locally and, positively, to be able to take the model directly home.

Drain taps and the different materials

An outlet tap can be very different in the materials, so it is highly recommended to see what materials are available. After all, it depends on quality and every consumer wants to enjoy a corresponding model and that works best, taking into account the quality of the materials. If you only need a simple plastic model or plastic model, you will most likely find it in the field shelland wealth as well as on the web and that also inexpensive. But there are also stainless steel models in the World Wide Web, which of course are provided with much greater quality, in order to be eligible for a long-lasting use. Since a consumer has to take a closer look at what he wants and for what use the outlet taps are, it should also be taken into account to order the best outlet taps.

Manufacturer for outlet taps

Of course, there are also many different no-name manufacturers for a tap, but well-known manufacturers are also involved. For all those who have no idea what can happen, which outlet taps there are, a list of manufacturers for a tap is certainly recommended, because the search is helpful and so a selection much easier according to their own criteria can be considered. The following manufacturers offer an outlet tap.

– Guarantee
– Bode
– Beko
– OKS
– PHD
– IBC

These manufacturers are the best known for finding a drain tap. They are modern, high quality and appropriately named. Since it makes sense to devote exactly to these providers, but even the no-name is still nothing in the way, if the budget does not allow more.

[relatedYouTubeVideos relation=”keywords” terms=”drain cock” max=”1″]

*Last update on 2019-09-28 / Affiliate links(we get a commission when you buy on amazon) / Images from Amazon Product Advertising API

Do NOT follow this link or you will be banned from the site!