10 Best turning chisels of 2019

  • 1
  • Features
    • Ideal kit for turning small pens, spindles, bowls and larger projects
    • The M2 high speed steel 5-1/4-inch blades outlast high carbon steel 6-to-1 and will give you years of use
    • Set includes 8 essential chisels: 3/16-inch parting tool, 5/8-inch Spear scraper, 1-inch skew chisel, 5/8-inch skew chisel, 5/8-inch round nose scraper, 1/2-inch bowl gouge, 3/4-inch spindle gouge, 7/8-inch roughing gouge
    • Comes with beautifully turned 10-3/4-inch hardwood handles in an attractive wood display box
    • Super value for all turners
  • 2
  • Features
    • The wood-turning chisels for use on woodturning lathes.
    • Manufactured from High Speed Steel, these chisels will perform well in both hard and soft woods.
    • They maintain a sharp cutting edge much longer than their carbon steel equivalents, requiring less time being re-sharpened They are fitted with full sized contoured germany Fraxinus mandshurica handles for user comfort and brass ferrules.
    • Set of 8 woodturning tools supplied in a wooden box. Overall length: 415 mm. Length of blade: 160 mm.
    • 1"(25.4mm)roughing gouge 7/8"(22mm)roughing gouge 1"(25.5mm)skew chisel 5/8"(16mm)skew chisel 5/8"shear scraper 3/6" parting tool 5/8" round nose scraper 1/2" spindle gouge
  • 3
  • Features
    • This is one of the most complete and most used turning tool sets you will find. Each tool blade is made from M2 High Speed Steel (HSS) which outlasts standard carbon steel blades 6 to 1. Each blade is approximately 5-1/4" long and will give you years of dependable use. Each tool handle is beautifully turned hardwood that are approximately 10-3/4" long making this a perfect set for beginners or advanced turners alike.
    • The set includes 8 turning tools: 1 each 3/16" Parting Tool, 1 each 5/8" Scraper, 1 each 1" Skew Chisel, 1 each 5/8" Round Nose Scraper, 1 each 1/2" Bowl Gouge, 1 each 3/4" Spindle Gouge, 1 each 5/8" Spear Scraper and 1 each 7/8" Roughing Gouge
    • Each tool is fitted with a ferrule and balanced for performance while turning. The tools can be sharpened as often as needed. While the tools are essentially ready to use out of the box, it is recommended that you hone or sharpen the tools to your preferred grind angle before using them for the first time.
    • The Savannah 8 pc set is by far one of the most popular turning tool sets because of its value, quality and overall simplicity. Each tool has been designed with this in mind and is sure to bring you years of use.
    • To help protect the tools when not in use, this set comes in a closable wooden case.
  • 4
  • Features
    • Ideal kit for turning small pens, spindles, bowls and larger projects.
    • The M2 High Speed Steel 5-1/4-Inch blades outlast high carbon steel 6-to-1 and will give you years of use.
    • Set includes 8 essential chisels: 3/16-Inch parting tool, 5/8-Inch spear scraper, 1-Inch skew chisel, 5/8-Inch skew chisel, 5/8-Inch round nose scraper, 1/2-Inch bowl gouge, 3/4-Inch spindle gouge, 7/8-Inch roughing gouge.
    • Comes with beautifully turned 10-3/4-Inch hardwood handles in an attractive wood display box.
    • The perfect set for all wood carving and chiseling lovers.
  • 5
  • Features
    • Chisels are 11-inch with 8-inch handles
    • Comes in an attractive wooden display box
    • 3/8-inch gouge for rough cutting
    • 1/8-inch parting tool for cutting tennons, and parting-off
    • 1/2-inch oval skew for smooth cuts and finished surfaces
  • 6
  • Features
    • SHARPENED CHISEL HEADS - Accurately pre-sharpened by machine for all turning tools.
    • BLADE - 6.3-Inches High Speed Steel blades outlast high carbon steel and will give you years of use.
    • HANDLE - 10-Inch Walnut wooden handle is harder and comfortable for using.
    • WOODEN CASE - Enhanced all parts includes double layer panels, enlarged structure, thickened hinge, packaging in mail box with EPE protection, to keep the turning tools and case in good condition.
    • CONTENTS - 1-Inch Roughing Gouge; 7/8-Inch Roughing Gouge; 5/16-Inch Spindle Gouge; 1-Inch Skew Chisel; 5/8-Inch Skew Chisel; 5/8-Inch Spear Scraper; 5/8-Inch Round Nose Scraper; 5/8-Inch Parting Tool
  • 7
  • Features
    • GENERAL USAGE - Great for the professional or beginner. This High Quality Brand New Set is durable and dependable for all your wood cutting and working projects! Great Holiday Gift Idea for your hobbyist or handy man!No matter if you are carving intricate details into your favorite wood or chiseling runners for you faviorite furniture piece this set is sure to include your basic necessities.Great variety yet small and portable to easily store at home or carry to local woodworker events.
    • DURABILITY - High quality wood handles with Steel edges make this tool able to provide a life time of enjoyment. Hobbiest and professionals alike will enjoy the durability and dependability in which this chisel set provides.
    • ORGANIZED STORAGE- Stores easily and efficiently in a box.
    • PRECISION- Steel cutting edges and high grade wood handles make this a must have in any wood working tool kit. Durable easy to sharpen edges make this a long lasting addition.
    • CONTENTS: 2-Skew: 1", 1/2" , 1-Spear Point: 1/2" , 1-Parting Tool: 1/8" , 1-Round Nose: 1/2" , 3-Gouge: 1/4", 1/2", 3/4"
  • 8
  • Features
    • Premium long lasting HSS blades with beautifully turned and stained hardwood handles and brass ferrules
    • Includes:-1/4-inch roughing gouge, 1/8-inch spindle gouge,-1/4-inch round nose scraper, 3/32-inch parting tool,-1/4-inch skew chisel
    • Chisels are 10-inch in overall length, with 4-inch blades
    • Fantastic buy for five essential chisels
    • Comes in an attractive wooden display box
  • 9
  • Features
    • Handle Details: The most beautiful lathe tool handle on the market, 100% USA made by American craftsman. CNC machined from solid aircraft aluminum for balance, durability, and to last for years. Covered with a soft, comfortable foam rubber grip to reduce hand cramping during long turning sessions and for great tool control. Overall length is 17"; outside diameter is 1 3/8"; tool opening is ½" diameter. Tools can be easily changed by loosening the two stainless steel set screws.
    • Benefits of Carbide Lathe Tools: Simple to use for all skill levels making woodturning fast and more enjoyable. You can focus on your project and not on techniques or sharpening. No long learning curve or expensive sharpening equipment. You can begin turning as soon as your box arrives because each tool comes with a very sharp, rotatable carbide cutter. Just rotate the cutter head ¼ turn for a clean, sharp edge and you are back to turning wood.
    • Full Size Tool Details: CNC machined from ½" square stainless steel, making them stronger, stiffer and less likely to roll than round shaft tools. Stainless steel will never rust. These full size tools feature an overall length of 12", with a handle tang of ½" diameter x 2½" length.
    • Tool Use: The Simple Turner & Hollower is the simplest to use carbide tool on the market. You'll appreciate the simplicity with which your project can be quickly turned & hollowed to the desired shape using this tool. The Simple Rougher carbide tool makes roughing much simpler & less physical as most of the shock created by interrupted cuts is absorbed in the tool rest instead of your hands & arms. The Simple 55 Detailer carbide tool that provides a much higher level of woodturning creativity.
    • Tool Engraving: Each Simple Woodturning Tool is engraved so you know exactly what tool you have. That makes finding replacement cutters very simple! Look for authentic Simple Woodturning Tool replacement cutters. STH = Simple Turner and Hollower. SR = Simple Rougher. S55D = Simple 55° Detailer
  • 10
  • Features
    • Easy wood turning on your lathe with Savannah Carbide Turning tools. We all know how "enjoyable" sharpening our turning tools can be. We also know that if you don't have the tool at just the right angle when turning the results can be more than undesirable. With the Savannah Carbide Turning Tool Set you can eliminate the inconvenience of sharpening your turning tools and hold the tool in position to cut clean and smoothly.
    • When the tool dulls, simply rotate the tip for a fresh, clean cutting edge. The carbide tips will stay sharper longer compared to standard turning tools as well. The tips are replaceable when needed (extra tips are sold separately).
    • Unlike standard tools, when using carbide tipped cutter such as these, you keep the cutter straight in on the turning which produces a shearing action. This produces much cleaner cuts and tends to be easier then using standard turning tools
    • The handles each have molded grips that provide better grip and less fatigue after extended periods of use. Over all Length: Approximately 13-1/8" Handle Length: Approximately 9-1/8" Tool Shaft: Approximately 4" Set Includes: 1 ea. Mini Turning Tool with Square Carbide Tip 1 ea. Mini Turning Tool with Round Carbide Tip 1 ea. Mini Turning Tool with Diamond Carbide Tip Note: Tips can be replaced with Easy Wood Carbide Tips.
    • Overall Length Approximately 13-1/8, Handle Length Approximately 9 1/8, Tool Shaft Approximately 4". Set Includes: All 3 tools and Black Storage Case
  • Handle Details: The most beautiful lathe tool handle on the...
  • Benefits of Carbide Lathe Tools: Simple to use for all skill...
  • Full Size Tool Details: CNC machined from ½" square...
  • The wood-turning chisels for use on woodturning lathes.
  • Manufactured from High Speed Steel, these chisels will...
  • They maintain a sharp cutting edge much longer than their...
  • Premium long lasting HSS blades with beautifully turned and...
  • Includes:-1/4-inch roughing gouge, 1/8-inch spindle...
  • Chisels are 10-inch in overall length, with 4-inch blades
  • Ideal kit for turning small pens, spindles, bowls and larger...
  • The M2 High Speed Steel 5-1/4-Inch blades outlast high...
  • Set includes 8 essential chisels: 3/16-Inch parting tool,...
  • Chisels are 11-inch with 8-inch handles
  • Comes in an attractive wooden display box
  • 3/8-inch gouge for rough cutting
  • SHARPENED CHISEL HEADS - Accurately pre-sharpened by machine...
  • BLADE - 6.3-Inches High Speed Steel blades outlast high...
  • HANDLE - 10-Inch Walnut wooden handle is harder and...
  • GENERAL USAGE - Great for the professional or beginner. This...
  • DURABILITY - High quality wood handles with Steel edges make...
  • ORGANIZED STORAGE- Stores easily and efficiently in a box.
  • Premium long lasting HSS blades with beautifully turned and...
  • Includes:-1/4-inch roughing gouge, 1/8-inch spindle...
  • Chisels are 10-inch in overall length, with 4-inch blades
  • Handle Details: The most beautiful lathe tool handle on the...
  • Benefits of Carbide Lathe Tools: Simple to use for all skill...
  • Full Size Tool Details: CNC machined from ½" square...
  • Easy wood turning on your lathe with Savannah Carbide...
  • When the tool dulls, simply rotate the tip for a fresh,...
  • Unlike standard tools, when using carbide tipped cutter such...

Woodworking Guide

Turning chisels or turning irons are the nuts and bolts of any turning work. These enable a whole host of crafting skills and forms in turning.

Wood chisels – General

Under the term turning chisels is a set of tools that are used for woodturning. They all have a handle, which usually consists of wood and a cutting edge. The different cutting edges enable different types of turning and differ according to the shape of the cutting edge. In the trade, they are usually offered in sets. In addition, they can also be purchased individually.

Wood chisels – material

Wood chisels are available in different materials. However, as these often have to be sharpened, it is recommended that turning chisels made of harder steel, as such blades can last longer than those made of softer steels. Because a sharp edge is decisive for a clean cut. Otherwise, the cutting edge can consist of steel, tool steel and HSS. Besides that, too turning chisels offered with a cutting edge of powdered metal, or from a powder metallurgy produced steel. In addition to wood, the handle can also be made of steel or aluminum. The handles or booklets are sometimes filled with lead, so they can get a greater inertia. Depending on the shape of the blade, there are different types of blades turning chisels ,

The Schruppröhre

At this turning chisels is a workpiece which is still non-round in its cross section, brought to a cylindrical shape. Therefore, this turning chisels serves the first work on the latheafford to. The blades of this turning chisels are shell-shaped to half-round and straight at the cutting edge to slightly convex. The cutting angle at this turning chisel is 35 to 45 degrees. The width of the blade is between 15 to 50 mm, the thickness of the steel being between 3 and 5 mm. This wood chisel is best used on soft to medium-hard wood.

The detail, shape or spindle tube

Such a lathe chisel serves to give the workpiece curly shapes. If the cutting edge is well prepared, the surface of the workpiece can also be smoothed with this lathe chisel. The harder the wood is, the greater the sheet thickness should be, so that vibrations and vibrations can be avoided. For turning oval shapes, it is advantageous if the tube is sharpened sharpened.

The bowl or cup tube

With this turning chisel, the shell is turned out inside. This wood chisel can also be used for larger woodwork. Most shell tubes are milled from solid round steel with the corresponding strong flanks. Because this minimizes the fluttering of the tool. If the wood chisel is long, this helps in addition to a balanced behavior during work. These wood chisels are available in different notch shapes, in U-shape or V-shape. In addition, this is provided with different poles.

Of the Chiselor flat chisel

The Flechmeissel has a flat bell and takes over almost all the work involved. This Toolserves to finish the surfaces. These can be curved or spherical. This wood chisel allows a very smooth surface as well as the parting and grooving. The leading edge of the tool is skewed. In addition, the leaf is tapered in thickness or straight. There are also chisels with oval cross section in the trade, which promote a gentle glide on the palm rest.

The plate steel

A plate steel turns low-lying narrow plates, which are unreachable with the chisel. In this turning chisel, the cutting angle varies depending on the hardness of the wood. The width of the disc player is selected according to the disc to be played.

The parting steel

A parting steel is used to cut off the long woodwork. Compared to the plate steel, the parting steel has a conical cross section, so that it generates less frictional heat due to smaller areas.

Tips before buying

For beginners, it is certainly worth buying a turning chiselsset. It should be ensured that the handles are ergonomically shaped and the tools are well and safe in the hand. When choosing materials should be taken to spend rather more money for higher quality materials. For example, the blade dulls faster, this manifests itself when working through a greater resistance. In order to avoid injury risks, always work with a sharp blade, as this facilitates the turning work. The handle should also not be too light to have a better knife inertia. Because the simple and safe handling is the most important requirement for successful turning work.

[relatedYouTubeVideos relation=”keywords” terms=”turning chisels” max=”1″]

Contents

*Last update on 2019-09-27 / Affiliate links(we get a commission when you buy on amazon) / Images from Amazon Product Advertising API

Do NOT follow this link or you will be banned from the site!