10 Best wall bottle opener of 2019

  • 1
  • Features
    • Reliable pal. Fine craft. Two optional styles. Faux rustic iron and shiny industrial alloy. Simple, strong and durable vintage bottle openers.
    • Steady Easy Use. Pry and remove bottle caps. It is easier and quicker with single hand. Why two?
    • Go as you please. Mounted on anywhere you like and make DIY openers. Outside deck, on the porch, in the garage, by the pool, equipping a beer carrier, under a bar, on a chair leg, desk leg, etc.
    • Icy bottle in hand; desperated to drink; only to find your openers are taken away by mystical oriental power AGAIN? Take 3 or 4 iGraver openers mounted in your house, and there is nothing this mystical power can do.
    • Come with screws for mounting. Suggestion: Mounted on vertical walls/woods or on where the upper part of opener is leaned out. Do not mount on slopes. Liquid spills out or sheds when bottles were opened upside down.
  • 2
  • Features
    • Remove beer & soda caps with a quick flick of one hand using this high-quality bar accessory
    • Mounts easily to any vertical surface in your bar, backyard or kitchen with 4 screws & sleeves
    • Made from stainless steel so it will never rust & always preserves its elegant appearance
    • Comes in set of 2 - Install one in the kitchen for soda & another at your home bar counter for beer!
    • Unique, vintage cap remover is ideal for restaurants or bars - Great gift for beer & soda lovers
  • 3
  • Features
    • ✔ WALL MOUNTED BOTTLE OPENER WITH MAGNETIC CAP CATCHER - ingeniously simple design utilizes two embedded neodymium rare earth magnets to snap the bottle cap to the bottle opner and prevent it from falling to the floor. Compact size (3.15"H x 2.28"W x 1.22"D) makes it easy to intall just about anywhere within convenient reach.
    • ✔ STAINLESS ALLOYS FOR INDOOR & OUTDOOR USE - unlike cast iron bottle openers which rust and often stain the surfaces they are mounted to, Wally McMagnet is made of a stainless alloys and coatings so it can be used indoors or outdoors without the risk of staining.
    • ✔ TIMELESS CLASSIC WITH A TWIST - the clean vintage and unbranded appearance of this bottle opener is guaranteed to match your appliances and décor with style. Included mounting hardware (two screws and drywall anchors) match the finish of the opener. Installation only takes a few short minutes.
    • ✔ AMAZING GIFT- Wally McMagnet makes an awesome gift for under 10 dollars which is sure to be appreciated for years to come. Treat yourself or treat your dad, groomsmen, brother, or any other beer lover. This little gem comes with a black velvet gift bag for a good reason. The gift bag can also be repurposed in a variety of handy ways.
    • ✔ LIFETIME WARRANTY - crafted with quality workmanship, materials, and finishes for a lifetime of enjoyment so you can buy it today with total confidence.
  • 4
  • Features
    • EASY OPENING WITH ONE HAND:Pry and remove bottle caps. It is easier and quicker with a single hand. Caps neatly collect in the bottom string bag
    • AWESOME ACCESSORY: This wall bottle opener is a rust proof bottle opener. Perfect for any man cave, bar, pub, kitchen, patio, cabin and so on. Excellent birthday, housewarming & anniversary gifts for men and beer lovers
    • EASY ACCESS: Mount on any wall or anywhere you like, closest to where your festivities take place. You will never have to hunt down the bottle opener again
    • MATERIAL: Vintage wood and cast iron cap catcher, this bottle make your life easier
    • OVERALL DIMENSIONS: Amazon size of string bag W 4.72" X D 2.75" X H 2.75". Plank height 11.81"
  • 5
  • Features
    • Gold Cast Iron Grizzly Bear Bottle Cap Opener Measures Apx. 4 1/4" tall by 2 1/2" wide
    • Grizzly Bear bottle opener mounts on the wall through the three predrilled holes (screws included)
    • Wall Mount Grizzly Bear bottle opener makes great rustic cabin decor for a home bar, shop, barn, or garage
    • Vintage Reprodcution Bottle Opener is made from cast iron so your bottles will open for years to come
  • 6
  • Features
    • 1.EASY DRINK OPENER: Quickly pop bottle caps off Corona, Heineken, Sam Adams or your favorite soda bottles with a single hand and minimal leverage.
    • 2.VINTAGE STYLE: Featuring a beautiful, vintage gun metal brown accent, our openers look fantastic in a dorm room, kitchen, home bar, or even a pub.
    • 3.PREMIUM DURABILITY: Our openers are far stronger than a keychain, carabiner or flip flops bottle opener, able to handle thousands of bottle tops.
    • 4.HOME OR PROFESSIONAL USE: Indie Craft Supply has made a versatile bottle opener for beer bottles and soda bottles that can be used both personally and commercially, be it a man cave, outdoor patio or restaurant.
    • 5.FAST INSTALLATION: Each order includes a 24-count of 1/2" black aluminum wood screws so you can mount each bottle opener almost anywhere.
  • 7
  • Features
    • EASY DRINK OPENER: Quickly pop bottle caps off Corona, Heineken, Sam Adams or your favorite soda bottles with a single hand and minimal leverage.
    • VINTAGE STYLE: Featuring a beautiful, vintage gun metal black accent, our openers look fantastic in a dorm room, kitchen, home bar, or even a pub.
  • 8
  • Features
    • ☑️ENHANCED QUALITY - Crafted from Superior Stainless Steel, this product is perfect for both outdoor and indoor. The heavy-duty neodymium magnet is set for a lifetime of serious cap fetching.
    • ☑️EASY & FUN TO USE - Our unique design delivers countless adaptable mounting options. The quick and clean installation will allow you to swiftly spark up the party.
    • ☑️EPIC GIFT IDEA - Guaranteed to have a strong impact on any occasion! This fine piece of hardware will mark its territory and the heart of its receiver with a good mood.
    • ☑️EACH PACKAGE INCLUDES - A wall mount Bottle Opener, a powerful Magnet Bottle Tops Catcher and 3 Premium Sturdy Screws. The packaging is an exquisite Gift Ready Box; a perfect presentation for an unforgettable present.
    • ☑️100% RISK-FREE PURCHASE - If you are not completely happy with your purchase for any reason, let us know and we'll take care of it.
  • 9
  • Features
    • Built with high-quality wood with a vintage/rustic finish (Dimensions: W 4.72" X D 2.75" X H 2.75". Plank height 11.81")
    • Goes with literally any home decor, perfect for any man cave, bar, pub, kitchen, patio, cabin and so on. Excellent birthday, housewarming & anniversary gifts
    • Easy to install, mounting screws included. Mount on any wall or anywhere you like. You will never have to hunt down the bottle opener again
    • Easy opening with one hand - As opposed to most wall mounted beer openers, this one is attached to the wall with an improved double interlock system, allowing you to easy opening with one hand
    • 100% SATISFACTION GUARANTEED - Contact us and let us know if you have any questions - Your satisfaction is our TOP priority!
  • 10
  • Features
    • Retro-style bottle opener perfect for the hunting cabin, fishing camp, or man cave
    • Can mount directly to your YETI Tundra, wall, table or boat dock
    • Rugged design, made of cast stainless steel, provides premium durability and makes opening bottles easy
    • Four screw design provides a strong mount
    • Dimensions: 2.5 in long x 2.5 in wide x 1.25 in high
  • Built with high-quality wood with a vintage/rustic finish...
  • Goes with literally any home decor, perfect for any man...
  • Easy to install, mounting screws included. Mount on any wall...
  • Remove beer & soda caps with a quick flick of one hand using...
  • Mounts easily to any vertical surface in your bar, backyard...
  • Made from stainless steel so it will never rust & always...
  • Reliable pal. Fine craft. Two optional styles. Faux rustic...
  • Steady Easy Use. Pry and remove bottle caps. It is easier...
  • Go as you please. Mounted on anywhere you like and make DIY...
  • EASY OPENING WITH ONE HAND:Pry and remove bottle caps. It...
  • AWESOME ACCESSORY: This wall bottle opener is a rust proof...
  • EASY ACCESS: Mount on any wall or anywhere you like, closest...
  • Gold Cast Iron Grizzly Bear Bottle Cap Opener Measures Apx....
  • Grizzly Bear bottle opener mounts on the wall through the...
  • Wall Mount Grizzly Bear bottle opener makes great rustic...
  • 1.EASY DRINK OPENER: Quickly pop bottle caps off Corona,...
  • 2.VINTAGE STYLE: Featuring a beautiful, vintage gun metal...
  • 3.PREMIUM DURABILITY: Our openers are far stronger than a...
  • EASY DRINK OPENER: Quickly pop bottle caps off Corona,...
  • VINTAGE STYLE: Featuring a beautiful, vintage gun metal...
  • ☑️ENHANCED QUALITY - Crafted from Superior Stainless...
  • ☑️EASY & FUN TO USE - Our unique design delivers...
  • ☑️EPIC GIFT IDEA - Guaranteed to have a strong impact on...
  • Built with high-quality wood with a vintage/rustic finish...
  • Goes with literally any home decor, perfect for any man...
  • Easy to install, mounting screws included. Mount on any wall...
  • Retro-style bottle opener perfect for the hunting cabin,...
  • Can mount directly to your YETI Tundra, wall, table or boat...
  • Rugged design, made of cast stainless steel, provides...

Wall bottle opener guide

The original under the openers
More than 80 years ago wall bottle opener Entry into the private households of the USA. Previously, the original – the STARR X – was only found on vending machines of Ford’s car factories. Since the 90s, the cult object is produced by the company Brown Manufacturing. Initially, the opener conquered breweries, bottlers and beverage dealers. Today, the practical and modern accessory enriches some kitchens, the party cellar, a pub or bar. In the past often copied, there is the original wall bottle opener made of powder-coated cast iron. The lettering „open bottle here“ is designed in solid colors or is highlighted by a different color scheme. The color palette of the mount ranges from silver over red, blue or brown. The painted or sandblasted product is equipped with two holes for easy wall mounting. The scope of delivery of the wall bottle opener includes the appropriate screws.
Meanwhile, many nostalgic bottle openers are offered for wall hanging in retro style. The differently colored products and material combinations, for example of wood with metal, are now supplemented by collecting containers or so-called cap catcher made of sheet metal, which are available in different versions. Whether nostalgic with floral decor, trendy with trendy figures or in plain monochrome, there are hardly any personal wishes.
On some models is the bottle openerin American style on a solid wood fiber board with a digitally printed motif. Even with these products, the bottle cap is simply removed by a hand movement. Instead of falling into a collection container, up to 60 bottle caps can be collected hanging from a magnet. Attention! The magnet does not belong in the hands of children.

Opening a crown cork
Bottles are usually closed with a crown cap made of sheet metal. If they can not be opened by hand with a screw cap, a bottle opener is necessary. Worldwide has the crown-shaped edge of the bottle caps 21 teeth. Initially, there were 24 spikes in the manufacturing process, which had to be adjusted due to production and due to a changed size of the bottle neck. In the crown cap is a seal made of polyvinyl or polyethylene. Radius, height, thickness, inside or outside diameter are standardized. The patent was filed in Baltimore in 1892 by the American inventor William Painter. The size of a crown cork resembles the shape of the bottle opener, which can hook on one side under individual prongs to lift the closure. The resulting hissing sound triggers a sense of relaxation in many people. When opening the bottle cap is supported on the top of the bottle opener. As soon as the opener is pressed down, it dents or kinks the lid. An opened bottle can be closed again with a used bottle cap to protect against dirt or insects, as well as before the exhaust of carbon dioxide. Especially with collectors, the bottle caps enjoy a great popularity. Their price is determined by the rarity value and age of the crown cap. The recyclable raw material can be processed into an art object, ornament or decorative piece. In some countries, a crown cap is used as a figure in the dame or mill game. For children, they can be the basis of a noise or a rattle instrument. Occasionally, the inner surface of a crown cork is provided with an invitation to participate in the lottery of a beverage manufacturer.

[relatedYouTubeVideos relation=”keywords” terms=”wall bottle opener” max=”1″]

*Last update on 2019-10-02 / Affiliate links(we get a commission when you buy on amazon) / Images from Amazon Product Advertising API

Do NOT follow this link or you will be banned from the site!