10 Best laminate cutter of 2019

  • Cut where you work - save time walking to and from your saw
  • One shear blade outlasts over 20 saw blades
  • Quiet operation/ no electricity - Cut anytime day or night
  • Designed to cut laminate, vinyl, solid wood and engineered...
  • Cuts up to 9" wide
  • Angle gauge allows for cuts up to 45 degrees
  • The laminate flooring cutter is made of heavy metal steel,...
  • The laminate flooring handle cutter has a comfort grip...
  • The cutter has a movable V support, which can be used to...
  • USA Made - Not a cheap, imported knock-off. Factory Backed...
  • Max Width 9 inches.Max Rake/Angle - 45 degrees on 6 Inch...
  • DUST FREE - Cut where you work. 2-Position Aluminum Fence....
  • Cut where you work - save time walking to and from your saw
  • One shear blade outlasts over 20 saw blades
  • Quiet operation/ no electricity - Cut anytime day or night
  • Cuts laminate up to 8-Inch wide and 10mm thick
  • Heavy duty steel frame for maximum stability
  • Positionable-InchV-Inch support keeps planks level while...
  • Cuts solid, engineered and laminate flooring with ease
  • Makes cross, miter and rip cuts
  • Lightweight design for transport and use at any project...
  • The laminate flooring cutter is made of heavy metal steel,...
  • The laminate flooring handle cutter has a comfort grip...
  • The cutter has a movable V support, which can be used to...
  • For Laminate, Engineered Wood, Bamboo flooring, Parquet,...
  • 4 mm thick tungsten steel sharp blade, included a 600 Grit...
  • Straight cut and 45 degree angle cut. Clean and Straight...
  • The Original Straight Cut Laminate Shear
  • The MA72500 is our most popular Straight Cut Laminate Shear,...
  • With hand positioned over the laminate, cut so that single...

Laminate cutter guide

In order to make it as cozy as possible in your own home, there are some tips and tricks concerning the furnishing and equipment of the rooms. But in recent years, a trend has ensured that the floor gets more attention. Because up to now it was mainly the walls and of course the furniture that was used to provide comfort and a stylish atmosphere in your own four walls. Here a simple plastic floor has often been quite sufficient. But today it looks very different. High quality, durable and visually appealing floor is in demand today and is therefore often relocated. With a good price-performance ratio, especially laminate has been able to develop a very good reputation here. However, to ensure that laminate can be properly processed and adapted, it is the right one Toolvery important. On laminate cutter should therefore always be there when laying, so that the effort and the annoyance can be reduced by incorrect or expensive sawing.

What are the advantages of using a laminate cutter?
Actually one offers laminate cutter on closer inspection, clearly more advantages than may seem at first glance. Because on the one hand, the use of such a cutter naturally means a significant reduction of the effort. It does not have to be complicated or the cables laid sawbe unpacked. At the same time means one laminate cutter also much less noise. The alternative to such a tailor is usually a stitch or a circular sawwhich is correspondingly loud in use. Due to the extremely quiet operation, the special cutters can also be used without any problems on weekends. modern laminate cutter are also able to cut very straight and clean. The sharp blades and a sophisticated concept make this possible. In addition are laminate cutter significantly cheaper than many people might suspect. Good models, which may also be used for regular use, are available today from a price of about 35 euros.

What should be considered when buying and using?
It is particularly important that when buying carefully paid attention to which soils and types of tailors is suitable. The manufacturers usually give this very precise information, so this does not need to be searched for a long time. If you are not sure which soil you would like to machine and cut with the equipment in the future, it would be a good idea to choose a tailor who can handle a variety of soils. So today there is a large selection of designs that can work not only with laminate, but also with parquet or floorboards. Here is a cross-soil working no problem. You should also pay attention to the knives used. To ensure that they are still sharp after regular use, high-quality materials are particularly important. The blades are usually made of aluminum or stainless steel and therefore very stable and resistant. These are very wear-resistant and therefore still very sharp even after years of use and suitable for regular use.
In the use should be paid especially to the safety. Although the handling should be very simple and easy to master even by artisanal laymen without any problems, can lead to inappropriate handling injuries and accidents happen. For this reason, a smooth and safe lower surface is always of particular importance during use. On this should also be taken to ensure that the cutter can not slip during actual use, as this can sometimes serious injury caused by the sharp cutting elements.

[relatedYouTubeVideos relation=”keywords” terms=”laminate cutter” max=”1″]

*Last update on 2019-09-18 / Affiliate links(we get a commission when you buy on amazon) / Images from Amazon Product Advertising API