10 Best puller of 2019

  • 1
  • Features
    • 【SAVE TIME &COST】: Dent repair kit can save a lot of money for you compared with the auto body shops, our paintless dent removal tools kit can help you repair your cars by yourself for many times.
    • 【 INSPIRED DESIGN】 : Our slide hammer T bar puller tool uses a lever-type design for metal panel dent repair works, and can also be decomposed into two different T bar, clever use.
    • 【Widely used】: The Slide Hammer T-Bar Tool is not only for car dent removal, but also can be used refrigerator, motorcycle body, washing machine and hail damage.
    • 【Corresponding to different dents】: The Slide Hammer Tool contains two kinds of plastic tabs, a total of 16pcs professional tabs can be repaired against a variety of dents, dent repair lifter can also be adjusted, according to the size of the dent can be adjusted.
    • 【DURABLE】: Tempered high carbon stainless steels and standard stainless steel are used depending on the design of a particular tool. rubber and durable plastic, they will don't hurt the auto surface, very sturdy and keep a long lifetime.
  • 2
  • Features
    • DAMAGE-FREE REMOVAL: This Mofeez 3" 4" 6" Inch 3-Jaw Gear Puller - Gear Removal Tool for Slide Gears, Pulley, and Flywheel makes removal simple and damage-free
    • BUILT TO LAST: Constructed from forged and hardened steel for strength and longevity; Steel drive screw is cold-rolled and acme-threaded to give you smooth performance even under high stress
    • VARIOUS APPLICATIONS: Removes slide gears, pulleys, and flywheels off of a shaft without damage to your application
    • 3 OR 6 POSITION DESIGN: The universal and reversible jaws offer versatile inside or outside grip along with short or long reach; The 3-inch gear puller has 3 positions and the 4-inch and 6-inch gear pullers both have 6 positions
    • PACKAGE CONTENTS: Included is a 3-inch gear puller with a 4.5-inch jaw spread and 1.5-inch jaw reach, 4-inch gear puller with a 6.25-inch jaw spread and 2.5-inch jaw reach, and a 6-inch gear puller with a 8.75-inch jaw spread and 4.75-inch jaw reach
  • 3
  • Features
    • DAMAGE-FREE REMOVAL: The ABN 3-Jaw Gear Puller Set - 3", 4", and 6" Inch Removal Tool Kit for Slide Gears, Pulley, and Flywheel makes removal simple and damage-free
    • BUILT TO LAST: Constructed from forged and hardened steel for strength and longevity; Steel drive screw is cold-rolled and acme-threaded to give you smooth performance even under high stress
    • VARIOUS APPLICATIONS: Removes slide gears, pulleys, and flywheels off of a shaft without damage to your application
    • 4 OR 8 POSITION DESIGN: The universal and reversible jaws offer versatile inside or outside grip along with short or long reach; The 3-inch gear puller has 4 positions and the 4-inch and 6-inch gear pullers both have 8 positions
    • PACKAGE CONTENTS: Included is a 3-inch gear puller with a 4.5-inch jaw spread and 1.5-inch jaw reach, 4-inch gear puller with a 6.25-inch jaw spread and 2.5-inch jaw reach, and a 6-inch gear puller with a 8.75-inch jaw spread and 4.75-inch jaw reach
  • 4
  • Features
    • This portable power puller gives you 4 tons (8,000 lbs) of maximum pulling power and weights less than 10 lbs. It is up to 30% lighter than comparable pullers without skimping on the power. A sturdy carry storage case is included. Easily store the power puller in your truck, trailer, workshop or garage. Ideal for off road vehicle recovery, loading heavy loads unto trailers, pulling fences, logs, rocks, and stumps
    • Built to last all steel frame and gears. Premium steel construction keeps the power puller resistant to wear and tear. High quality galvanized finish gives it excellent protection against weather and elements
    • Dual gear and dual locking pawl system distributes force evenly so you can enjoy easy and consistent pull. We use 1/4 in. aircraft-grade braided steel cable. Our 3/8 in. hooks are drop forged with safety latch and fits up to 1/2 in. chains
    • 18 in. high-leverage handle. We also designed a comfort grip that covers more than half of the handle (10.5 in.). You have more space to comfortably apply force and pull the load more easily
    • Hook to hook distance is 4 ft. 8 in. fully extended and 1 ft. 11 in. fully contracted. The maximum capacity is 4 tons (8,000 lbs) and a safe working load is 2 tons (4,000 lbs)
  • 5
  • Features
    • TOP QUALITY: This professional grade 3-Jaw Gear Puller is made of heat-treated carbon steel with a polished chrome finish to prevent rust and corrosion for powerful tool performance.
    • SUPERIOR PERFORMANCE & DESIGN: The 3-Jaw Gear Puller is an excellent tool for safely removing gears, sprockets, bearings, pulleys and flywheels. Features reversible jaws for inside and outside pulling, making this tool perfect for multiple jobs. The hex head screw is suitable for use with a ratchet wrench or combination spanner to smoothly pull gears or bearings from 50mm-102mm in diameter.
    • WHAT YOU GET: (1) 4" 3-Jaw Gear Puller
    • TESTED & APPROVED: Pulling gears or bearings requires a professional grade specialty tool. That's why professional mechanics have the T1A 3-Jaw Gear Puller in their garage or shop. T1A automotive technicians have used the T1A 3-Jaw Gear Puller and the results are in: TESTED and APPROVED for strength, durability, and fit.
    • 100% SATISFACTION GUARANTEE: Every TruBuilt 1 Automotive tool is covered with a 12-month replacement warranty and a 30-day money back guarantee! Not satisfied? Return it for a full refund - TruBuilt to Last.
  • 6
  • Features
    • The "original" U-Joint Puller
    • Engineered for use with up to a one-inch impact wrench providing the ultimate "brute strength" for disassembling drivelines
    • Eliminates dangerous vice and socket, or hammering method
    • Does not damage the driveshaft, yokes, joints, or bearing cups and is tested and recommended by the Driveshaft Division of Dana Corporation
    • Made in Canada
  • 7
  • Features
    • Double wheel
    • Double claw
    • Capacity: 4000 lbs
    • Ideal for constructions, automotive, farm and ranch, home projects and workshop
  • 8
  • Features
    • Max reach: 3-3/8-in max spread: 4-in. Reversible two-jaw design for inside or outside pulls. Chrome vanadium steel yoke and jaws
    • Fine thread center bolt for maximum torque and minimal effort
    • Meets or exceeds ANSI standards. Lifetime warranty.
    • Reversible two-jaw design for inside or outside pulls
    • Chrome vanadium steel yoke and jaws
  • 9
  • Features
    • Vibrant
    • 20990
  • 10
  • Features
    • DAMAGE-FREE REMOVAL: The ABN 4" Inch 3-Jaw Gear Puller - Gear Removal Tool for Slide Gears, Pulley, and Flywheel makes removal simple and damage-free
    • BUILT TO LAST: Constructed from forged and hardened steel for strength and longevity; Steel drive screw is cold-rolled and acme-threaded to give you smooth performance even under high stress
    • VARIOUS APPLICATIONS: Removes slide gears, pulleys, and flywheels off of a shaft without damage to your application
    • 8-POSITION DESIGN: The universal and reversible jaws offer versatile inside or outside grip along with short or long reach
    • SPECIFICATIONS: 6.25-inch (158mm) jaw spread; 2.5-inch (63mm) jaw reach
  • The "original" U-Joint Puller
  • Engineered for use with up to a one-inch impact wrench...
  • Eliminates dangerous vice and socket, or hammering method
  • DAMAGE-FREE REMOVAL: This Mofeez 3" 4" 6" Inch 3-Jaw Gear...
  • BUILT TO LAST: Constructed from forged and hardened steel...
  • VARIOUS APPLICATIONS: Removes slide gears, pulleys, and...
  • TOP QUALITY: This professional grade 3-Jaw Gear Puller is...
  • SUPERIOR PERFORMANCE & DESIGN: The 3-Jaw Gear Puller is an...
  • WHAT YOU GET: (1) 4" 3-Jaw Gear Puller
  • This portable power puller gives you 4 tons (8,000 lbs) of...
  • Built to last all steel frame and gears. Premium steel...
  • Dual gear and dual locking pawl system distributes force...
  • TOP QUALITY: This professional grade 3-Jaw Gear Puller is...
  • SUPERIOR PERFORMANCE & DESIGN: The 3-Jaw Gear Puller is an...
  • WHAT YOU GET: (1) 4" 3-Jaw Gear Puller
  • The "original" U-Joint Puller
  • Engineered for use with up to a one-inch impact wrench...
  • Eliminates dangerous vice and socket, or hammering method
  • Double wheel
  • Double claw
  • Capacity: 4000 lbs
  • Max reach: 3-3/8-in max spread: 4-in. Reversible two-jaw...
  • Fine thread center bolt for maximum torque and minimal...
  • Meets or exceeds ANSI standards. Lifetime warranty.
  • Vibrant
  • 20990
  • DAMAGE-FREE REMOVAL: The ABN 4" Inch 3-Jaw Gear Puller -...
  • BUILT TO LAST: Constructed from forged and hardened steel...
  • VARIOUS APPLICATIONS: Removes slide gears, pulleys, and...

Puller advisor

Without special tools like puller If fast-paced times were today most difficult, some activities and things would certainly be impossible. On the one hand, it is one puller a simple cleaning device and a complicated one Tool, which is designed in different form and for different tasks.

Purpose and purpose of puller as a special tool

Whether in the workshop or in the private household – puller will be needed sometime. Often, bolts, bearings and cranks, as well as many other mechanical components, are stuck tightly, retracted, pressed in and / or shrunk and can not be loosened by hand. Most components are highly sensitive to rough handling such as shock, deform or jam. Be here puller used and offer an optimal solution.

Pullers are a special tool that works in principle similar to the cleaning device / window cleaner. Only the tool is not about the elimination of water, but about the removal / separation of mechanical parts. In short: The puller should be interconnected parts (clamped or pressed) of any type such as ball-bearingor disconnect and disconnect sockets on axles. The tool grips one component with its pliers, while the screw presses against the shaft. This ensures a gentle and even separation.

Different models for special tasks

Pullers show up as a tool in very different variants, which should basically fulfill a certain purpose or serve the separation of certain compounds. The most famous pullers are probably the two / three-arm models. These are needed for previously mentioned ball bearings or bushings, for example, to solve them of axes.

For steering axles or ball joint bolts, however, other pullers are used. These are more reminiscent of an inverted short pliers. Finally, pullers are divided into hydraulic and mechanical models. Other variants are internal extractors or special bearing pullers, even joint pullers are offered commercially.

Pullers are also in demand for bikes

By the way: pullers are even needed on bicycles. Most bikes have on their pedal axis conical quadrilateral, which often can not be solved with the usual tools. This is exactly where a special puller is used, specifically a crank puller.

To release the crank, the crank puller must be screwed into the crank. Here already high-quality cranks differ from the inferior models. With professional cranks, the required pull-off function is shown by the fact that a socket is already installed. The crank will be solved in any case and can be removed.

The puller as a real all-rounder

There are actually pullers in other variants, which were always designed for special areas. Their shape and especially their intended function are similar / similar to the already mentioned hydraulic and mechanical pullers with two / three arms.

For example, specialist retailers find pole terminal pullers or tab pullers. There are also special external pullers and pullers, which have a clamping bracket. Exceptional models are, for example, internal extractors (designed for extracting / removing bearings that fit with a fixed outer ring fit into a housing) and internal pullers. Furthermore, there are ball joint or wheel hub pullers available. Other variations of the pullers are, for example, the cartridge wrench, the oil filter claw, so-called nut sprinkler or lancing pin extractor and spring tensioner.

Different construction of the pullers

Most of the mentioned puller variations remind in their design of pullers with two / three arms. Others, like the nut-sprinkler, are visually similar to ordinary pliers. Separators or hub pullers have multiple arms, but the ball joint puller has none. In fact, the latter is similar to a ‚tacker‘. Explaining all models of the pullers certainly goes far beyond the scope of this guide. Tip: In the network, all variants of the pullers are explained extensively (also visually) by a number of dealers / retailers.

[relatedYouTubeVideos relation=”keywords” terms=”puller” max=”1″]

Contents

*Last update on 2019-09-18 / Affiliate links(we get a commission when you buy on amazon) / Images from Amazon Product Advertising API